Rent Telescopic Boom Lifts in Chemnitz

You can rent telescopic boom lifts for Chemnitz from Luibl Rental in 26 models with 14.00 to 56.90 m working height, up to 27.43 m horizontal outreach and up to 454 kg platform capacity. Chemnitz presents work at height with a typical task: between the set-up position and the working point there are front gardens and street trees on the Kassberg, sawtooth roofs and extensions in the old factories, or a slope in the Chemnitz valley. A lift that only goes straight up cannot reach such points. The straight telescopic boom bridges the distance and brings the platform to the facade even from the second row. Delivery is from our location in Passau.

We sort the rental fleet by working height, because in Chemnitz it is the first selection question. Outreach and platform capacity then narrow down the model. All values come from the data sheets in the category Telescopic Boom Lifts.

Height class	Models in the fleet	Working height	Horizontal outreach	Platform capacity
Entry level	3 (Haulotte H14TX, Genie S-45, S-45XC)	14.00–15.72 m	10.30–11.18 m	227–454 kg
Mid-range	9 (incl. Genie S-60 FE, S-65 Trax, Zoomlion ZT21JE-Li)	20.60–22.95 m	12.30–17.79 m	227–454 kg
Upper mid-range	6 (incl. Manitou 280 TJ, Genie S-85XC, Zoomlion ZT26JE)	25.91–28.70 m	19.70–23.32 m	227–454 kg
Large machines	6 (incl. Genie S-125, SX-135XC, JLG 1350SJP)	34.00–43.30 m	23.51–27.43 m	227–454 kg
Special heights	2 (Genie SX-150, SX-180)	48.33–56.90 m	24.38 m	340 kg

Of the 26 models, 22 run on diesel, three are electric (Zoomlion ZT18JE-Li, ZT21JE-Li and ZT26JE) and one is hybrid (Genie S-60 FE). If the platform also has to reach down over an edge, for example behind a parapet, models with a jib are the better choice. You will also find them under Articulating Boom Lifts.

The Kassberg is considered one of the largest contiguous Wilhelminian and Art Nouveau districts in Germany. For painters, roofers and plasterers this means closed rows of houses, four- to five-storey buildings, front gardens and old trees between the carriageway and the facade.

Reach the facade and roof from one set-up position

If the lift stands at the edge of the carriageway, the facade is often several metres away. Mid-range models with 12.30 to 17.79 m horizontal outreach bridge the front garden and pavement and reach cornices, dormers and eaves. For work on the roof surface and ridge behind the eaves, it is better to plan one class higher.

Register the use of the street with the town early

If a telescopic boom lift is placed on the pavement or carriageway, you usually need a special use permit or a traffic management order from the City of Chemnitz. Clarify the set-up area, barriers and period before ordering. We schedule the delivery for the approved date.

As the "Saxon Manchester", Chemnitz was a centre of textile and mechanical engineering. Many of the factories are being refurbished, converted or continued as commercial space today. Their design determines the choice of lift.

Sawtooth roofs and skylights: outreach instead of height

On sawtooth roofs, glazing, gutters and valleys lie in rows one behind the other. The lift cannot stand directly below the working point there. For roof refurbishment, glazing and gutter cleaning, horizontal outreach therefore counts. The upper mid-range with 19.70 to 23.32 m covers several roof rows from one set-up position.

In halls: electric or hybrid

For work in closed halls, for example during conversions or in running production areas, the three electric models with 20.60 to 28.70 m working height or the hybrid Genie S-60 FE are suitable. In electric mode, no exhaust is produced at the job site. Check the floor load capacity, door width and clearance height beforehand.

High structures: large machines from 34 m

For gables of factory buildings, stair towers, rooftop structures or signage at great height, six models with 34.00 to 43.30 m and two special models up to 56.90 m are available. Even the Genie SX-180 cannot reach structures that are higher. For those, we recommend other methods.

Chemnitz lies in the valley of the Chemnitz river on the edge of the Ore Mountains. Many streets rise towards the higher areas, and courtyards are often lower than the access road. For a telescopic boom lift, this is more than a question of access.

Weight: 5,900 to 24,856 kg

Depending on the model, our telescopic boom lifts weigh 5,900 to 24,856 kg. A Genie S-65 Trax puts 12,269 kg on the surface, a Genie SX-135XC 21,526 kg. Underground car park slabs, courtyard cellars and paving slabs must carry this load. On uncertain ground, load distribution plates help. On slabs, a structural engineer clarifies the permissible load.

Inclination: only work within the permitted range

Every telescopic boom lift may only work within the inclination range permitted by the manufacturer. The values are in the operating manual of the model. For slopes, please therefore tell us the gradient at the set-up position. We then choose a suitable model or suggest another set-up position.

The more precise the enquiry, the more reliably the machine fits the first time. We need these details:

1. Working height: height of the highest working point above the set-up position, not above the street.

2. Horizontal outreach: horizontal distance from the set-up position to the working point, including front garden, pavement or roof rows.

3. Platform capacity: persons, tools and material together. The models carry 227 to 454 kg.

4. Set-up position: ground, gradient, access width and whether a permit for the street space has been granted.

5. Job site and period: address in or around Chemnitz, start and duration of the rental.

From Passau it is around 390 km via Regensburg, the A93 and the A72 to Chemnitz. Telescopic boom lifts in these weight classes travel to the job site on a low-loader. Three points are important for planning:

• Access: The low-loader needs a passable access route and space for unloading. In narrow streets on the Kassberg or the Sonnenberg, we clarify the unloading point in advance.

• Date: Plan large machines from 34 m early, as they are less often available. We will get back to you promptly with a quote and delivery date.

• Rental period: You rent by the day, week or month, depending on the construction schedule.

Anyone operating a telescopic boom lift in Chemnitz must be qualified and authorised to do so by the employer. The basis is the German Occupational Safety and Health Act and the Ordinance on Industrial Safety and Health.

Qualification in accordance with DGUV Principle 308-008

DGUV Principle 308-008 describes the theoretical and practical training of operators of mobile elevating work platforms. Operators must be at least 18 years old, suitable and instructed. An operator licence or the IPAF PAL Card serves as proof. Through certified partners we inform you about training without obligation and free of charge.

Risk assessment and instruction

Before use, the employer assesses the hazards in accordance with Section 3 BetrSichV, for example road traffic, overhead lines, wind and ground. Section 12 ArbSchG and Section 12 BetrSichV require instruction on the specific machine. At handover, we instruct you in the operation of the rented model.

Are you planning facade work on the Kassberg, a roof refurbishment in an old factory or a job on a slope? Tell us the working height, horizontal outreach, platform capacity, set-up position and period. We will suggest the right telescopic boom lift and get back to you promptly with a quote. You will find further machines for the city on our page Chemnitz.

Enquire now without obligation