Rent telehandlers in Dingolfing: 63 models for every trade

You can rent telehandlers for Dingolfing from Luibl Rental from 63 models: 19 fixed, 36 roto and 7 heavy-duty telehandlers plus one electric model, with lifting heights from 4.30 to 38.90 m and capacities from 1,250 to 33,000 kg. In Dingolfing plants and suppliers, hall construction, housing and farms or municipal depots are often only a few kilometres apart. Each of these trades calls for a different type: on the plant site capacity in a tight space counts, in hall construction the outreach, in housing the lifting height and on the farm the attachment. We select the model with you on that basis and deliver it from our location in Passau.

The table shows which type from our rental fleet typically covers which trade in Dingolfing. All values are taken from the machines' data sheets.

If several trades follow one another on a site, a roto telehandler with changing attachments can often take on several tasks. So tell us the sequence of work, not just the heaviest load.

The BMW Group plant Dingolfing as well as suppliers, logistics companies and service providers in the business parks along the A92 account for a large share of industrial jobs. There the telehandler moves machines, fixtures and plant components, often between halls, racks and ongoing plant traffic.

Heavy-duty telehandlers for machine relocation and plant construction

For heavy single loads, seven heavy-duty telehandlers with 7,200 to 33,000 kg capacity are available. What matters is not the rated capacity but what the load chart allows at the planned outreach and lifting height. If the centre of gravity of a machine is off-centre, the permissible load drops further. So give us the weight, dimensions and position of the centre of gravity, and we will check the right chart.

Electric telehandler for production and warehouse halls

The Manitou MT 625e runs on electric power and produces no exhaust fumes on site. At 1.81 m wide and 1.92 m high it fits through many hall doors, lifts 2,500 kg to up to 5.85 m and reaches 3.40 m forward. Plan a charging point with a power supply and check with the plant whether charging is permitted there.

Ask for the site rules before choosing the machine

On plant sites the operator decides which machines may enter, which routes they use and which induction your staff need. Ask for these requirements before ordering a model. You receive the dimensions and operating weight of the chosen machine with the quotation so that you can prepare the registration.

New halls for production, storage and logistics are built in Dingolfing mainly in the business parks on the A92. A roto telehandler rotates its superstructure together with the boom and works with forks, load hook or winch. On many hall construction sites it thus takes on lifting and assembly tasks for which a mobile crane and a forklift would otherwise be needed.

Plan the outreach first, then the lifting height

With beams and roof elements, what counts is how far from the set-up position the load is placed. The Magni RTH 6.39SH reaches 38.90 m lifting height and 27.00 m horizontal outreach with 6,000 kg capacity; as the outreach increases, the permissible load drops considerably. We put the load chart next to your assembly plan and suggest a model with reserve.

Working on outriggers: space and ground for the stabilisers

Roto telehandlers lift large loads on outriggers. The outriggers need firm, level ground and enough space next to the hall wall. The Magni RTH 6.39SH measures 8.60 × 2.54 × 3.12 m and weighs 24,000 kg. Check in advance whether backfilled working spaces, cable trenches or fresh paving can take this load, and lay out support plates if necessary.

In new residential areas and on renovation sites in town, a fixed telehandler brings pallets, blocks and insulation directly onto the floor slab, scaffolding or roof. On smaller sites it often replaces the tower crane for material supply.

Development areas: lifting heights up to 18.80 m and the operating weight in view

For houses with two to four storeys, compact models are usually sufficient. The Merlo P 40.17 reaches higher and further with 16.70 m lifting height, 12.50 m outreach and 4,000 kg capacity; the largest fixed model in the fleet lifts up to 18.80 m. On unpaved site roads in the Isar floodplain, weight also counts: the P 40.17 weighs 10,630 kg, and wet floodplain soil often carries considerably less after rain than when dry.

Upper and Lower Town: set-up area and slope

In the old town the telehandler usually stands on a street or square. The town of Dingolfing issues a special use permit or a traffic order for this; on listed buildings the heritage protection authority is also involved. Between the Lower and Upper Town the ground drops away. Only extend the boom on level ground and within the inclination permitted by the manufacturer. For narrow access routes we give you the dimensions of compact models with the quotation.

Outside the town, agriculture, municipal depots and public building projects in the Isar valley and the hill country shape the jobs. The task there often changes within a single job, so the attachment is decisive. Available for rent:

• Bucket: for bulk material, soil, gravel or bedding.

• Load hook: for pipes, manhole rings and components that need to hang freely.

• Cable winch and lattice jib winch: for assembly work where the load is lowered under control.

• Work platform: for work on gutters, lighting or hall doors.

If people work at height for longer periods, a telescopic boom lift is often the better choice. For hook, winch and platform the operator needs additional training levels, which are listed in the section on duties.

From our location in Passau it is around 100 km to Dingolfing via the A3 and the A92. We also deliver to Landau an der Isar, Wallersdorf, Eichendorf, Frontenhausen, Marklkofen, Mengkofen and Moosthenning. How the telehandler arrives depends on its dimensions and weight: the MT 625e measures 3.83 × 1.81 × 1.92 m at 4,800 kg, larger machines come on a low-loader. Give us the site address, a level unloading area and, for plant sites, the delivery gate. The transport costs are shown in your quotation; read more about delivery and collection under Transport.

Anyone driving a telehandler must be at least 18 years old, suitable, trained and authorised in writing by the employer (DGUV Regulation 68, section 7).

Training under DGUV Principle 308-009 in three levels

The basis for all types is level 1 for fixed telehandlers. Anyone driving roto telehandlers or working in crane mode with load hook and winch needs the additional level 2a, and the work platform requires the additional level 2b. The familiarisation with the specific model at handover does not replace this training.

Risk assessment and instruction in the company

Before use, the employer assesses the hazards under section 3 of the Industrial Safety Regulation (BetrSichV), in Dingolfing for example plant traffic, pedestrians in the old town, soft floodplain soils and overhead lines above farmyards. Instruction takes place under section 12 of the Occupational Safety and Health Act (ArbSchG) and section 12 BetrSichV. If your team lacks a level, we provide information on training via certified partners free of charge and without obligation and put you in touch with a suitable provider.

Tell us the trade, weight and dimensions of the heaviest load, lifting height and outreach, the location with its ground conditions and the period. We will suggest one of our 63 models with suitable attachments and arrange the transport.

Request now