Rent Telescopic Boom Lifts in Dingolfing

You can rent telescopic boom lifts for Dingolfing from Luibl Rental from 26 models with 14.00 to 56.90 m working height: 22 with diesel, three with electric and one with hybrid drive. In Dingolfing the decisive factor is often not the height alone but who approves the set-up position: the operator on a plant site, the town and the heritage authority in the old town, and the owner of the bank area along the Isar. Each of these bodies places its own requirements on the drive, weight and outreach of the lift. We select the model with you on that basis and deliver it from our location in Passau.

Two questions come first when choosing a lift: How high is the work position, and are exhaust fumes allowed on site? The table sorts our telescopic boom lifts by both criteria.

All values are taken from the machines' data sheets. Depending on the model, the platform capacity is between 227 and 454 kg and the horizontal outreach between 10.30 and 27.43 m.

The BMW Group plant and the suppliers, logistics companies and service providers in the business parks along the A92 shape most jobs in Dingolfing. On such sites the operator decides which machines may enter, where they stand and when work takes place. Clarify these requirements before you choose a model.

Registration and access: report dimensions and weight in advance

Many plants require the machine to be registered with its dimensions and weight, an induction into the site rules and a work permit. Our telescopic boom lifts weigh between 5,900 kg (Haulotte H14TX) and 24,856 kg (Genie SX-180). Whether gate widths, access routes and hall floor can take the chosen machine is best checked together with the plant and us before the transport is planned.

Inside the hall: electric or hybrid instead of diesel

Where no exhaust fumes may be produced inside the building, you work with the electric models Zoomlion ZT18JE-Li (20.60 m), ZT21JE-Li (22.95 m) and ZT26JE (28.70 m). They produce no local emissions during operation. The Genie S-60 FE (20.60 m) with hybrid drive is the right choice when the job alternates between hall and yard. Plan a charging point with a power supply for the electric machines and ask the plant whether charging inside the hall is permitted.

Outside the building: diesel with outreach over installations

For facades, roofs and outdoor installations the 22 diesel models are available. If pipe bridges, ramps or storage areas lie in front of the work position, the horizontal outreach counts: the Genie SX-135XC reaches 43.15 m working height and 27.43 m outreach.

The old town is divided into the Lower Town near the Isar and the Upper Town on a terrace above it, with the Ducal Castle (Herzogsburg) and the Storchenturm tower. For work on facades, roofs and towers, the lift there usually stands on public ground.

Apply for special use and heritage approval in good time

To set up on a street, pavement or square you need a special use permit or a traffic order from the town of Dingolfing. On listed buildings such as the Herzogsburg or the parish church of St. Johannes, you also coordinate the work with the heritage protection authority. Both procedures take time, so we recommend booking early.

Terrace between the Lower and Upper Town: set up level, compensate with outreach

At the transition between the two parts of town the ground drops away. Telescopic boom lifts only operate within the inclination approved by the manufacturer in the operating manual. Therefore place the machine on a level surface, even if it is further away from the building, and choose a model with correspondingly more outreach. In narrow lanes, lighter machines such as the Genie S-45 at 7,005 kg help.

The Isar flows right through Dingolfing, with dykes and bank areas accompanying it through the district as far as Landau an der Isar. Anyone working on bridges, embankment walls, pumping stations or buildings behind the dyke first needs the consent of the owner of the area, for dykes usually the responsible water management office.

Floodplain soils: spread the load and recheck after rain

In the Isar floodplain the groundwater level is high, and meadows and unpaved tracks often cannot carry heavy machines. The heavier the lift, the more important paved access routes and load distribution plates become. After flooding or prolonged rain, reassess the area, even if it carried the load before.

Work from the foot of the dyke instead of the crest

Instead of standing on the dyke crest, set the lift up on firm ground on the land side and reach over the dyke. Models with 19.70 m horizontal outreach and more are usually suitable for this, for example the Manitou 260TJ or the Genie S-85.

With these details we check the reach diagram and suggest a model:

1. Working height and distance: highest working point above the set-up position and horizontal distance to the work position.

2. Platform load: persons, tools and material, 227 to 454 kg depending on the model.

3. Location: hall, yard or public area, and whether exhaust fumes are allowed.

4. Approvals: site rules, special use permit or consent of the landowner.

5. Access and ground: gate widths, clearance heights and paving, asphalt or grass.

From our location in Passau it is around 100 km to Dingolfing via the A3 and the A92. The lift arrives at your site on a low-loader, as it does in Landau an der Isar, Mamming, Loiching, Niederviehbach, Gottfrieding, Pilsting, Reisbach and the other towns in the district of Dingolfing-Landau. Give us the site address, an area for unloading and, for plant sites, the delivery gate. For large machines such as the Genie SX-180 we check the route in advance. The transport costs are shown in your quotation.

A telescopic boom lift may only be operated by persons who are trained, instructed and authorised by the employer to do so. Training follows DGUV Principle 308-008, instruction follows section 12 of the Occupational Safety and Health Act (ArbSchG) and section 12 of the Industrial Safety Regulation (BetrSichV).

Risk assessment under section 3 BetrSichV: consider plant, traffic and riverbank

Before use, the employer assesses the hazards. In Dingolfing these particularly include plant traffic with forklifts and lorries, road traffic in the old town, set-up positions on banks and dykes, overhead lines and wind. The rescue of a person from the platform must also be planned. The plant operator's rules apply in addition to these duties.

Operator licence and IPAF PAL Card via certified partners

The familiarisation with a specific model at handover does not replace training. Your employees obtain the proof, such as an operator licence or the IPAF PAL Card, from a certified training provider. We provide information on training via certified partners free of charge and without obligation and put you in touch with a suitable provider.

Are you planning work in a hall, on a facade in the old town or on a structure on the Isar? Send us the site address, working height, distance and the requirements for the set-up position. We check the reach diagram and suggest one of our 26 models. Request a quote now