Moenchengladbach is growing where there is no room for heavy equipment: inner-city renovations around Hindenburgstrasse, facade work on existing buildings in Rheydt and infill construction in commercial areas such as Neuwerk or Giesenkirchen. For exactly these applications, Luibl Rental hires out Maeda mini cranes – rubber track cranes that fit through doorways, stand on balconies and still lift loads that would otherwise require a mobile crane along with a full road closure.

A conventional mobile crane requires manoeuvring space, outrigger width and usually a road closure. In tight courtyards, stairwells or on load-bearing-limited balconies in Moenchengladbach's older buildings, that is simply not an option. A Maeda mini crane weighs just a few hundred kilograms to just over a tonne depending on the model, can be manoeuvred through standard doorways and braced on narrow outrigger feet – the low centre of gravity and short wheelbase ensure it remains stable against tipping even with the boom extended, as long as the load moment limiter is observed.

Typical applications in and around Moenchengladbach:

• Installing window elements and facade panels into existing buildings without fully dismantling the scaffolding

• Lifting materials onto balconies, roof terraces or into courtyards where a mobile crane cannot reach

• Machine installation in factory halls with low headroom, such as in older industrial buildings from the former textile industry

• Stairwell modernisation where the crane itself must travel through the building

• Roof truss renovation on terraced houses where there is no crane parking space to the side

The most common reason a mini crane deployment fails is not the load capacity, but access: door width, the headroom of an underground car park or the load-bearing capacity of a basement ceiling above the planned crane position. We clarify these three points in advance by telephone, so that no model arrives on the day that cannot get through.

Luibl Rental operates several Maeda model ranges, graduated by load capacity and reach – from compact rubber track cranes for purely indoor use to models with greater hook height for facade work on multi-storey buildings. Which model is suitable depends on three factors:

1. Maximum load at the required outreach point

2. Access width and headroom to the site location

3. Available outrigger area and its load-bearing capacity

We assess this in advance by telephone or on site – the goal is always the smallest model that can safely handle the load, not automatically the largest available.

A mini crane is of no use if it does not arrive on site on time. Luibl Rental delivers with its own low-loader fleet – without dependence on third-party hauliers. This is particularly noticeable for short-notice inner-city deployments in Moenchengladbach, when a road closure or a crane window leaves only a few hours and a delayed trailer would ruin the entire working day.

Operating a mini crane is subject to crane operation regulations; operator briefing is mandatory, as is observance of the load moment limiter and the permissible ground pressure at the installation point. Before each deployment we clarify whether an on-site operator briefing is sufficient or whether a qualified crane operator is required – this depends on the load weight, the duration of the deployment and the prior knowledge of your staff.

1. Clarify the site location, load weight, outreach and access situation by telephone or via the contact form

2. Agree on model recommendation and delivery date

3. Delivery by our own low-loader, on-site briefing, handover protocol

4. If required: collection after deployment without separate scheduling with a third-party haulier