Hire Telescopic Boom Lifts in Vienna – Safe Access at Height with AM-VO-Inspected Rental Platforms

Anyone working at height on Vienna construction sites faces a decision that can mean project delays or a smooth process: choosing the right telescopic boom lift. Not every machine copes with the narrow access routes of the inner-city districts, the sensitive floors of exhibition venues, or the rough ground of the industrial areas in Inzersdorf and Liesing. Luibl Rental & Sales delivers telescopic boom lifts with working heights of up to 57 m directly to your site in the greater Vienna area and Lower Austria – via our own low-loader fleet from a network of over 200 locations, on schedule and AM-VO compliant.

Vienna does not present uniform requirements. Roof refurbishments in the period buildings of the 7th district call for different technical parameters than maintenance work on the roof of a production hall in the Industriegebiet Süd business park. What matters is the combination of working height, outreach, drive concept and off-road capability – in that order.

Luibl's rental portfolio for Vienna includes models from leading manufacturers such as Genie, JLG, Manitou and Haulotte, with working heights from 14 m up to 57 m and outreach of up to 28 m.

Diesel Telescopic Boom Lifts with All-Wheel Drive for Rough Outdoor Use

For steel construction, façade work and building projects in the outer districts as well as in the Wiener Neustadt industrial area, diesel telescopic boom lifts with all-wheel drive and differential lock are the technically correct choice. Models such as the Genie SX-180 and the JLG 1350SJP reach working heights of up to 57 m and are designed for uneven site ground. Both machines offer level compensation and high residual load capacities when fully extended – a critical factor when load charts are tightly calculated.

Key technical features of this category:

• All-wheel drive (4x4) with engageable differential lock

• Emissions class Stage V (particulate filter as standard)

• Gradeability up to 45%

• Outriggers with a wide support base for soft ground

For use on cramped sites near the Gürtel ring road or in the inner districts, the slewing range within the vehicle's footprint is a decisive selection criterion. Machines with a compact rear overhang allow precise manoeuvring without endangering adjacent structures.

Electric and Hybrid Telescopic Boom Lifts for Indoor Use

On sites with emissions restrictions – Vienna exhibition halls, logistics centres, listed production facilities – diesel power is not an option. Luibl keeps electric and hybrid telescopic boom lifts in stock that operate with no exhaust emissions and significantly reduced noise levels.

Typical operating parameters:

• Drive: fully electric or bi-energy (switchable diesel/electric)

• Non-marking tyres for sensitive industrial floors

• Compact transport width for hall doors and clearance heights from 2 m

For indoor use on sensitive floors – for example, coated concrete floors in assembly plants – coarse-tread tyres must be explicitly ruled out. On request, Luibl provides machines with a smooth-tread, non-marking profile.

Maximum Working Height Versus Outreach

The most common planning mistake in machine selection: site managers focus solely on maximum working height and neglect outreach. For telescopic boom lifts, the load chart – the combination of outreach and permitted basket load at every boom position – is the governing document.

A machine with 57 m working height and 28 m outreach carries less in its fully extended position than in its base position. If you need to reach over a neighbouring building on a Vienna inner-city site with limited standing space, you need the outreach figure first – and only then the height.

Hire checklist before handover:

• Ground load-bearing capacity at the setup location (cellars, cable/pipe runs, asphalt surface)

• Clearance heights on the transport route to the site (underpasses, bridges)

• Available outrigger area for all four supports plus safety clearance

• For electric machines: charging connection (230 V / 400 V) and capacity on site

• Ground condition: load-bearing capacity for outrigger pads

Calculating Basket Load and Platform Size Correctly

Platform load capacity (basket capacity) is generally limited to between 230 kg and 400 kg. This load covers not only people but also tools, materials and PPE against falls. Anyone planning to have two technicians with toolboxes and safety harnesses in the basket needs to check the figures carefully against a 230 kg basket capacity.

For refurbishments of period buildings in Vienna's Gründerzeit housing stock, the slewing range of the boom arm becomes an additional parameter: negotiating obstructing edges – projections, bay windows, cornices – requires maximum articulation at the joint points and a boom arm with lateral oscillation, so the working area can be fully reached without repositioning the machine.

The Importance of AM-VO Approval for Vienna Construction Sites

In Austria, the Work Equipment Ordinance (AM-VO), § 7 and § 8, governs the regular inspection of work equipment before commissioning and at set inspection intervals. All Luibl rental machines for the Austrian market are inspected and maintained in accordance with the AM-VO – inspection records are handed over with the machine.

For construction projects involving subcontractors from Germany, the following additionally applies: DGUV Rule 100-500 (Chapter 2.10) remains relevant as the home market's safety standard. For construction firms operating across borders, it is advisable to agree with the responsible safety engineer which standard formally applies on the Vienna construction site.

Operator Licence and PPE When Operating Aerial Work Platforms

ISO 18878 defines the international standard for training operators of mobile elevating work platforms. The IPAF operator licence (PAL Card) is issued on this basis and is widely recognised in Austria. No driving licence is required for self-propelled telescopic boom lifts on enclosed construction sites – but proven operator training is required.

PPE against falls is mandatory when operating telescopic boom lifts. Clipping the safety harness to the designated anchor points in the basket is not a recommendation but a legal requirement under ÖNORM EN 280.

Luibl can put you in touch with training partners for the IPAF operator licence on request.

Not sure whether outreach and basket load will work out for your Vienna construction project? Our access equipment experts will assess the load chart for your specific application – before the machine arrives on site.

Request a quote now

Planning a project with several machines or a duration spanning several weeks? Luibl puts together a tailored tiered offer with a single point of contact for all machine types in the greater Vienna area and Lower Austria.

Request a combined quote