
Rent Telehandlers in Brandenburg: 63 Models up to 38.90 m
You can rent telehandlers from us for construction sites and businesses anywhere in Brandenburg, choosing from 63 models: fixed, roto, heavy-duty and electric, with 4.30 to 38.90 m lift height and 1,250 to 33,000 kg lifting capacity. The state is flat, but many job sites are on open, often sandy terrain: solar parks in Lusatia, hall construction sites along the Berlin Ring, farms in Prignitz and Uckermark. There, the lift height matters less than which load the telehandler can move safely at which outreach and what the ground under the machine can carry. We agree these values with you before the machine leaves our location in Passau for Brandenburg.
Telehandlers in Brandenburg: four types for four job profiles
Choose the type according to the task, not according to the greatest lift height. Our rental fleet is structured as follows:
| Type | Models | Lift height | Lifting capacity | Typical use |
|---|---|---|---|---|
| Fixed Telehandlers | 19 | 4.30 to 18.80 m | 1,250 to 5,500 kg | Building materials, pallets and bulk goods on sites, yards and storage areas |
| Roto Telehandlers | 36 | 15.42 to 38.90 m | 4,000 to 8,000 kg | Hall, roof and assembly work from a fixed position |
| Heavy-Duty Telehandlers | 7 | 9.40 to 11.92 m | 7,200 to 33,000 kg | Steel beams, precast concrete elements and machine components |
| Electric Telehandlers | 1 | 5.85 m | 2,500 kg | Halls, livestock buildings and noise-sensitive areas |
Fixed telehandlers drive across the site while loaded and are the economical choice for material handling. Roto telehandlers stand on their outriggers and rotate the upper carriage with the boom without repositioning the chassis. The Manitou MT 625e runs on electric drive and therefore produces no exhaust at the job site.
On sandy ground in Brandenburg, the operating weight of the telehandler determines the set-up area
The weight of the telehandler goes into the ground through the wheels or outriggers. On Brandenburg's sandy soil, on freshly backfilled utility trenches and on arable land, jobs fail precisely at this point. According to the data sheets, our machines weigh between 2,900 kg (Manitou ULM 412) and 24,000 kg (Magni RTH 6.39SH), plus the load.
Check the set-up area and access in advance
Before the job, clarify whether the access route and set-up area are paved or whether load distribution plates, excavator mats or a gravel layer are needed. For roto machines, this applies to every single outrigger point.
Choose a light machine for soft surfaces
Where only pallets or big bags are moved, a compact fixed telehandler such as the Manitou MT 420 with 4.35 m lift height and 4,190 kg operating weight is often sufficient. It puts considerably less load on tracks, yards and green areas than a large roto machine.
Capacity falls with outreach: the load chart decides which telehandler you need
The rated capacity in the data sheet only applies with the boom retracted and the load close to the machine. The further the load is moved forward or to the side, the less it may weigh. The load chart of the respective model and the fitted attachment is decisive.
This is how to proceed when selecting a machine:
-
Determine the weight of the heaviest single load including the attachment.
-
Measure the height and horizontal distance of the placement point from the possible set-up position.
-
Check both values in the load chart and plan a reserve.
An example: the Magni RTH 6.39SH has 6,000 kg lifting capacity and 27.00 m horizontal outreach. It does not reach both values at the same time. If a load has to be placed far out, we work with you to find the model whose load chart is sufficient for exactly this point.
Applications for telehandlers in Brandenburg: from solar parks to livestock buildings
Brandenburg combines energy projects, logistics, agriculture and the refurbishment of old buildings. Each of these fields calls for a different machine.
Solar and wind parks in Lusatia, Uckermark and Prignitz
On ground-mounted solar installations, fixed telehandlers distribute module pallets and substructures along the rows. When wind turbines are built, roto and heavy-duty machines handle components around the assembly area.
Hall and logistics construction along the Berlin Ring
In the business parks along the A10, roto telehandlers lift roof elements, trapezoidal sheets and ventilation equipment onto the hall structure. With a work platform attachment, fitters reach connection points at eaves and parapet.
Agriculture and farms
For harvest and conversion phases, farms rent additional telehandlers, for example to stack bales, for loading or for repairs to hall roofs and silos. With a bucket, a fixed machine becomes a handler for bulk material.
Refurbishment in Potsdam, Cottbus and Brandenburg an der Havel
In dense built-up areas, the set-up space counts. A roto machine stays in one place and serves several working points on facade and roof by rotating. If people work at height for longer periods, a telescopic boom lift in Brandenburg is often the better choice.
Attachments turn the telehandler in Brandenburg into a multi-purpose machine
In addition to the pallet fork, we rent out attachments for telehandlers: bucket, work platform, load hook, cable winch and lattice jib winch. This lets you cover material handling, lifting work and work at height with one machine. Every combination of telehandler and attachment requires the manufacturer's approval and its own load chart. We therefore put the combination together for your job.
Telehandler transport to Brandenburg: from Passau with coordinated planning
Depending on the job site, it is around 550 to 700 km from our location in Passau to Brandenburg. The telehandlers arrive at your site on a low-loader. In advance, we clarify with you:
-
delivery address, access and unloading area for the low-loader
-
start and end of the rental and collection
-
the separate transport effort for roto models with an operating weight of more than 20 t
If you are planning several machines or a long rental period, we recommend scheduling early. Read more about the process under Transport.
Telehandlers in Brandenburg may only be operated by instructed and authorised drivers
The user company is responsible for safe use. Under Section 12 of the German Ordinance on Industrial Safety and Health (BetrSichV), DGUV Regulation 68 and DGUV Principle 308-009, you may only entrust telehandlers to persons who are at least 18 years old, trained for the task, instructed and authorised in writing. For roto machines, crane operation with a load hook or winch and use with a work platform, the Principle provides for additional qualification levels. This includes:
-
a risk assessment for the specific job
-
instruction on the rented model and its attachments
-
checking the set-up area and stability before starting work
If your team lacks the qualification, we can put you in touch with a certified provider of telehandler training.
Frequently asked questions about renting telehandlers in Brandenburg

How does the telehandler get to Brandenburg?
Who may drive a rented telehandler in Brandenburg?
Can I use a telehandler on sandy ground in Brandenburg?
Fixed or roto telehandler: what do I need for my site in Brandenburg?
Which telehandlers can I rent in Brandenburg?
Enquire about a telehandler for Brandenburg now
Tell us the job site, heaviest load, lift height, outreach, type of ground and rental period. We will suggest a model and attachment and plan the transport from Passau. You will find further machines under Aerial work platforms and forklifts in Brandenburg. Contact us now