
Rent Telescopic Boom Lifts in Burghausen
You can rent telescopic boom lifts for Burghausen from Luibl Rental in 26 models with 14.00 to 56.90 m working height, up to 27.43 m horizontal outreach and up to 454 kg platform capacity. In Burghausen, two very different job sites lie close together: the chemical and refinery plants of the Bavarian Chemical Triangle with pipe bridges, columns and tanks, and the listed old town below the castle on the Salzach, which is around 1,051 m long. In both cases, the platform rarely sits directly above the set-up position, because pipes, projecting structures or the castle slope lie in between. The telescopic boom lift bridges this distance with its straight boom. Delivery is from our location in Passau.
Rent telescopic boom lifts in Burghausen: the right model for each task
Which telescopic boom lift fits follows from three questions: how high is the working point, how far is it from the set-up position, and what has to go into the platform? The table assigns typical tasks in Burghausen to the models in our rental fleet. All values come from the data sheets, which you will find for each model in the category Telescopic Boom Lifts.
| Task in Burghausen | Models | Working height | Horizontal outreach | Platform capacity |
|---|---|---|---|---|
| Halls, warehouses, flat roofs | Haulotte H14TX, Genie S-45, Genie S-45XC | 14.00–15.72 m | 10.30–11.18 m | 227–454 kg |
| Pipe bridges, facades in the old and new town | Genie S-60 FE, Zoomlion ZT18JE-Li, Manitou 220 TJ Plus, Genie S-65, S-65 Trax, S-65XC, S-65XC Trax, JLG 660SJ, Zoomlion ZT21JE-Li | 20.60–22.95 m | 12.30–17.79 m | 227–454 kg |
| Columns, tanks, church towers | Manitou 260TJ, Haulotte H28TJ Plus, Manitou 280 TJ, Genie S-85, Genie S-85XC, Zoomlion ZT26JE | 25.91–28.70 m | 19.70–23.32 m | 227–454 kg |
| High plant sections and silos | Genie S-105, JLG 1200SJP, Genie SX-125XC, Genie S-125, Genie SX-135XC, JLG 1350SJP | 34.00–43.30 m | 23.51–27.43 m | 227–454 kg |
| Special heights | Genie SX-150, Genie SX-180 | 48.33–56.90 m | 24.38 m | 340 kg |
The Genie XC versions take 454 kg in the platform, the standard models 227 kg. When two fitters go up with valves, insulation material or a welding unit during an overhaul, this reserve often decides the model.
Telescopic boom lifts in the Chemical Triangle: overhauls in the plants around Burghausen
In the chemical and refinery plants in Burghausen and in neighbouring Burgkirchen an der Alz, most work at height takes place during planned shutdowns. There, outreach, platform capacity and approval by the plant are decisive.
Pipe bridges and columns: working over the pipework
Pipe bridges, cable routes and columns stand in the middle of the plant; the set-up position is usually on the plant road next to them. The models in the 20 to 23 m class reach up to 17.79 m to the side and so also reach the far side of a wide pipe bridge without the platform resting on the pipes. For columns and high tanks, the Genie SX-135XC offers 43.15 m working height, 27.43 m horizontal outreach and 454 kg platform capacity.
Clarify plant approval and hazardous areas before use
Each plant decides for itself which machines may enter the site: registration at the plant gate, safety briefing, work permit. Whether a telescopic boom lift may be used in a potentially explosive area is decided by the plant operator. Tell us the plant, plant section and any hazardous zone in your enquiry, and we will check which machine is suitable.
Halls and enclosed plant sections: electric or hybrid
For work in halls and technical buildings, there are three electric telescopic boom lifts that are locally emission-free in operation: the Zoomlion ZT18JE-Li with 20.60 m, the Zoomlion ZT21JE-Li with 22.95 m and the Zoomlion ZT26JE with 28.70 m working height. The Genie S-60 FE with hybrid drive reaches 20.60 m. The other 22 models run on diesel and are intended for outdoor use.
Schedule shutdowns early
Overhauls are fixed well in advance, and many contractors request access equipment at the same time. Give us the shutdown period, number of machines and height classes early. This lets us plan models, delivery and collection to match your overhaul schedule.
Telescopic boom lifts at the castle and old town: on the Salzach, outreach counts
The old town lies tightly between the Salzach and the castle hill, and above it the castle complex stretches for around 1,051 m along the ridge. Set-up areas are scarce, and many buildings are listed.
Stadtplatz and In den Grueben: facades over pavement and projections
The colourful rows of houses on the Stadtplatz and in the lane In den Grueben stand close together. The telescopic boom lift stands on the carriageway and reaches over the pavement and projections to the facade with its boom. For three- to four-storey houses, the 20 to 23 m class is usually sufficient, for example the Genie S-65. To set up on public land, you need a special use permit and a traffic management order from the town of Burghausen.
Castle complex and castle slope: factor in the difference in height
At the castle, walls and towers stand on the edge of the slope, so the set-up position and working point are often on different levels. Include this difference in height in the working height you need. If the boom has to reach far over the slope, the 25 to 29 m class with 19.70 to 23.32 m horizontal outreach helps, for example the Haulotte H28TJ Plus. Agree work on listed monuments in advance with the owner and the monument protection authority and pass the conditions on to us.
New town and commercial areas: halls and low-rise buildings
On the upper terrace above the old town lie the new town, residential complexes and commercial areas with halls and flat roofs. For roof edges, skylights and signage, 14 to 16 m working height is often enough here, for example with the Haulotte H14TX.
Check the set-up position: telescopic boom lifts for Burghausen weigh 5,900 to 24,856 kg
A telescopic boom lift transfers its entire weight through the wheels into the ground. Therefore, clarify before ordering what the set-up position can carry. The Haulotte H14TX weighs 5,900 kg, the Genie SX-180 24,856 kg, and all models from 40 m working height are over 20 t.
-
Plant roads and plant areas: usually paved, but with shafts, covers and pipes underground. Ask the plant for the permissible surface load.
-
Salzach banks and floodplains: On soft ground, load distribution plates spread the weight. Plan for them in advance.
-
Paving in the old town: Under old houses and lanes there are often cellars and cavities. Clarify the bearing capacity with the owner or the town.
-
Slopes: The platform may only be driven and extended within the inclination permitted by the manufacturer in the operating manual.
Transport from Passau: how the telescopic boom lift gets to Burghausen
From Passau it is around 95 km via Pocking, Simbach am Inn and Marktl to Burghausen. The heavier the machine, the more planning the transport needs. For a plant, tell us the plant gate, contact person on site and the delivery window. In the old town, we clarify access, unloading point and time with you, because the lanes below the castle are narrow for low-loaders.
Operator duties for telescopic boom lifts in Burghausen: German law, Austrian law in Ach
Anyone operating a telescopic boom lift must be instructed and authorised to do so by the employer. Which regulations apply depends on the location of the job site.
Job site in Burghausen: ArbSchG, BetrSichV and DGUV
Under Section 12 of the German Occupational Safety and Health Act (ArbSchG) and Section 12 of the German Ordinance on Industrial Safety and Health (BetrSichV), the employer instructs employees before use. The training of operators of mobile elevating work platforms is governed by DGUV Principle 308-008. You provide proof with the operator licence or the IPAF PAL Card. In the platform, operators secure themselves with a full-body harness at the anchor point, as specified in the operating manual. Many plants also require their own safety briefing. Through certified partners we inform you and put you in touch with a training provider, at your premises, at our Passau location or by arrangement.
Job site in Hochburg-Ach: Austrian law
Across the Salzach bridge lies Hochburg-Ach in Upper Austria. There, the Employee Protection Act (ASchG) and the Work Equipment Ordinance (AM-VO) apply. Clarify before the job which proof of qualification your client in Austria requires.
Rent telescopic boom lifts in Burghausen now
Are you planning an overhaul in the Chemical Triangle or work on the castle and old town? Tell us the working height, horizontal outreach, platform capacity, set-up position and period. We will suggest the right telescopic boom lift and get back to you promptly with a quote.