Rent Telehandlers in Chemnitz: 63 Models up to 38.90 m

You can rent telehandlers for Chemnitz from Luibl Rental from a fleet of 63 models: fixed machines from 4.30 to 18.80 m lift height, roto telehandlers up to 38.90 m, heavy-duty machines and one electric telehandler. In Chemnitz, converted Wilhelminian factories, business parks along the A4 and A72 and farms on the edge of the Ore Mountains meet. Each of these jobs calls for a different combination of lift height, outreach and set-up position. We select the model with you according to load, height and ground and deliver it from our location in Passau to your site.

It starts with the question of what is lifted and where to. The table assigns typical loads on Chemnitz sites to the types in our rental fleet.

Load and destination	Type	Lift height in the fleet	Lifting capacity in the fleet
Pallets of building materials to the upper floors of factory buildings	Roto Telehandlers (36 models)	15.42–38.90 m	4,000–8,000 kg
Pallets, mesh boxes and formwork in the yard or warehouse	Fixed Telehandlers (19 models)	4.30–18.80 m	1,250–5,500 kg
Steel beams, machine parts and heavy precast elements	Heavy-Duty Telehandlers (7 models)	9.40–11.92 m	from 7,200 kg
Pallets in halls without exhaust at the job site	Electric Telehandlers Manitou MT 625e	5.85 m	2,500 kg

The values are the maximum values of the respective models. How much a telehandler actually lifts depends on the outreach: the model's load chart shows the residual capacity for every combination of height and reach. You will find all models with data sheets under Rent Telehandlers.

Many Chemnitz industrial buildings from the 19th and early 20th centuries, including spinning mills, machine factories and multi-storey workshops, are now being converted into offices, flats or commercial space. Moving material to the upper floors is often the bottleneck, because stairwells are narrow and goods lifts are missing or out of service.

Pallet fork at the window opening

A roto telehandler rotates its upper carriage and places pallets of drywall boards, screed bags or window elements directly at a window opening. Because it stands on its outriggers, it serves several window axes from one set-up position. The large models such as the Magni RTH 6.39SH reach 38.90 m lift height and 27.00 m horizontal outreach.

Access and courtyard decide the set-up position

In the courtyards of old factory complexes, the space for the outriggers usually limits the choice of model. Measure the width and height of the gateway and the free area for the outriggers in advance. In transport position, the Magni RTH 6.39SH measures 8.60 × 2.54 × 3.12 m and weighs 24,000 kg. If there are cellars or old channels under the courtyard, clarify the bearing capacity of the ground with your structural engineer.

Clarify the floor load in the building beforehand

The pallet not only has to arrive, it also has to be carried. Determine what imposed load the old floor slabs can take before heavy building materials are set down there.

Mechanical engineering, metalworking and automotive supply companies operate in the business and industrial parks around Chemnitz. There, it is rarely about great heights, but about handling, assembly and maintenance.

Fixed telehandlers for storage yards and new builds

A fixed telehandler loads trucks, stacks mesh boxes and places material over obstacles where a forklift cannot reach. With 4.30 to 18.80 m lift height and 1,250 to 5,500 kg lifting capacity, the 19 fixed models in the fleet cover most work in yards and on hall construction sites.

Electric telehandler for work in halls

For jobs in closed halls, the Manitou MT 625e is available. It is locally emission-free in operation, lifts 2,500 kg to 5.85 m and measures 3.83 × 1.81 × 1.92 m. Compare its width and height with your hall doors.

Heavy-duty telehandlers for machine relocations

When machines are relocated or steel components installed, the seven heavy-duty telehandlers with 9.40 to 11.92 m lift height and capacities from 7,200 kg are an option. If the load hangs from the hook, additional requirements apply to the driver, which we describe below.

South of Chemnitz the terrain rises towards the Ore Mountains. Sites on slopes, unpaved access roads and farms characterise the surrounding area.

Operating weight on unpaved ground

Telehandlers are built as all-terrain machines and also drive on gravel and grass. On soft ground, however, the operating weight counts: the Magni RTH 6.39SH weighs 24,000 kg and needs load-bearing tracks and pads for the outriggers. Tell us the gradient and ground, and we will suggest a model that suits the terrain.

Bucket and fork for farms

Farms use telehandlers for bulk goods, sacks and pallets. With a bucket or pallet fork, a rented fixed telehandler takes over this work at peak times such as harvest or during conversions of stables and storage halls.

You can rent these attachments with the telehandlers:

• Bucket: move sand, gravel or chippings on sites and yards.

• Work platform: bring people to height for short jobs on facade or roof. For longer work at height, telescopic boom lifts in Chemnitz are better suited.

• Load hook: lift and set down slung loads such as beams or big bags.

• Cable winch: lower loads on the rope into shafts or light wells.

• Lattice jib winch: guide loads during assembly work with additional hook height.

Which attachment fits which model follows from its approval. We agree this with you when you enquire.

It is around 390 km from our location in Passau to Chemnitz, usually via Regensburg, the A93 and the A72. We bring the telehandler to your site on a low-loader and collect it again after the rental. For planning, we need the delivery address, the access route with width, height and weight restrictions, and a contact person on site. For large roto and heavy-duty models, we recommend scheduling early, because transport weight and dimensions determine the route. More under Transport.

Anyone driving a telehandler on a site in Chemnitz must be trained and authorised to do so by the employer.

Authorisation and instruction

Under DGUV Regulation 68, only persons who are at least 18 years old, suitable, trained and authorised in writing by the employer may operate telehandlers independently. Section 12 ArbSchG and Section 12 BetrSichV require instruction on the specific machine, and Section 3 BetrSichV the risk assessment for the job.

Training levels in accordance with DGUV Principle 308-009

Training for rough-terrain telescopic handlers follows DGUV Principle 308-009. Level 1 applies to fixed telehandlers. For roto telehandlers and crane operation with a load hook or winch, the additional level 2a is required; for use with a work platform, the additional level 2b. Through certified partners we inform you about training without obligation and free of charge.

Tell us the heaviest load, the required lift height and outreach, the set-up position and the rental period. We will suggest a suitable model with attachment and plan the transport from Passau. You will find all other machines for your site under Rent construction machinery in Chemnitz.

Enquire now