Telescopic Boom Lift Rental in Crailsheim

Rent telescopic boom lifts for Crailsheim from Luibl Rental, choosing from 26 models with 14.00 to 56.90 m working height and 227 to 454 kg platform capacity. In Crailsheim the choice often depends on what has to go into the basket: in mechanical and plant engineering, fitters go up with components and tools, while on the facades of the town centre two people with hand tools are enough. That is why we sort the lifts by platform capacity first, then by height and operating weight, and deliver them from our Passau location.

Platform capacity is the total weight of people, tools and material that the basket may carry according to the data sheet. Choose it too tight and you have to take material up in several trips or replan. Our 26 telescopic boom lifts break down as follows:

The classes overlap in height. Around 22 m working height, for example, is reached by both the Genie S-65 with 227 kg and the Genie S-65XC with 454 kg platform capacity. At the same height, the load decides which model fits. Above 43.30 m only the Genie SX-150 and SX-180 remain, each with 340 kg.

Crailsheim is a centre of packaging machinery and plant engineering. At factory halls, roof structures and ventilation systems, fitters often take components, cable drums or sheet metal into the basket. For this we plan lifts of the 400 to 454 kg class.

Outside the hall: up to 27.43 m horizontal outreach

The Genie SX-135XC reaches 43.15 m working height and 27.43 m horizontal outreach with 454 kg platform capacity. This lets you reach roof edges and facade sections behind extensions, ramps or storage areas without standing directly at the wall. For lower halls, the Manitou 220 TJ Plus with 21.74 m and 400 kg or the Genie S-65XC with 21.81 m and 454 kg are sufficient.

Inside the hall: electric and hybrid with no exhaust at the work site

Under the hall roof, the Zoomlion ZT21JE-Li with 22.95 m and the Zoomlion ZT26JE with 28.70 m working height do the job, both electrically driven with 454 kg platform capacity. With 300 kg, the ZT18JE-Li and the hybrid-driven Genie S-60 FE each reach 20.60 m. Check the door width, door height and permissible floor load of the hall in advance, because even the lightest of these four models weighs 8,051 kg.

Clarify plant rules before the first lift

Many plants require a work permit, a briefing by the client and fixed routes on the premises. Give us the delivery time window and the contact person at the gate in your enquiry, and we will plan the handover accordingly.

Crailsheim town centre was largely rebuilt after the destruction of April 1945. For facade painting, gutters and signage on these buildings, the class up to 230 kg is usually sufficient, because two people with hand tools do not need 454 kg.

Compact models for tight set-up areas

At 5,900 kg, the Haulotte H14TX is the lightest telescopic boom lift in our rental fleet. It reaches 14.00 m working height and 10.30 m horizontal outreach. The Genie S-45 weighs 7,005 kg and reaches 15.72 m working height and 11.18 m outreach.

Town hall tower and Johanneskirche: large machines working from a distance

On towers and high roof areas, the lift has to reach up from an open space. The Genie SX-150 reaches 48.33 m and the SX-180 56.90 m working height, both with 340 kg platform capacity. With operating weights of 22,657 and 24,856 kg, they need a level, load-bearing set-up area. Coordinate work on listed monuments with the monument protection authority in advance.

Permit for the set-up location

If the lift stands on a pavement or road, you will usually need a special use permit or a traffic order from the City of Crailsheim. Allow lead time for this and define barriers and pedestrian routing at the same time.

Besides platform capacity, the ground is decisive in Crailsheim. Our telescopic boom lifts weigh 5,900 to 24,856 kg and stand directly on their chassis without outriggers. The weight therefore acts on a small number of contact areas.

Jagst floodplain and construction sites: plan for load distribution

Along the Jagst and on freshly backfilled construction sites, the ground often bears less than the operating weight requires. Clarify whether access routes need to be reinforced with panels or mats. At the same height, the lighter model helps: for around 22 m working height, the Genie S-65 weighs 10,449 kg and the JLG 660SJ 13,100 kg.

Logistics at the Feuchtwangen/Crailsheim motorway junction

In the logistics and commercial areas along the A6 and A7, the work often involves hall facades, lighting at loading ramps and signage. Asphalt yards usually carry the lifts well. Watch out for manhole covers, drainage channels and manoeuvring traffic, and cordon off the work area.

The more precise your enquiry, the better the first quote will fit:

1. Height and distance: working height and horizontal distance from the set-up location to the work point

2. Load in the basket: people, tools and material added together

3. Ground and access: asphalt, paving, grass or construction site, plus door width and door height

4. Place of use: indoors or outdoors, plant requirements for the drive type

5. Period and contact: rental start, rental duration and on-site contact person

With these details we will propose a model and name alternatives in case the preferred machine is booked for your period.

We deliver the telescopic boom lift from our Passau location by low-loader. From Passau it is around 320 km via the A3 to Nuremberg and on via the A6 to Crailsheim. We agree the delivery date with you. For large machines above 40 m working height we recommend early scheduling.

The low-loader needs a passable access route and a level area for unloading. If the work site is in the town centre or in a plant with access control, tell us the unloading location and possible time windows.

A telescopic boom lift may only be operated by persons who have been trained, instructed and authorised in writing to do so. The benchmark for training is DGUV Principle 308-008 (German Social Accident Insurance); instruction is governed by Section 12 of the German Occupational Safety and Health Act (ArbSchG) and Section 12 of the German Ordinance on Industrial Safety and Health (BetrSichV).

Risk assessment under Section 3 BetrSichV

Before use, the employer assesses the hazards: stability, wind, traffic, overhead power lines and rescue from the basket. In plants, the operator's own rules also apply.

Certification through accredited training providers

Familiarisation with a specific machine does not replace operator training. You can obtain an operator licence or the IPAF PAL Card from certified training providers. We will be happy to tell you about training through certified partners.

Are you planning an installation in a plant, facade painting in the town centre or work on a logistics hall? Tell us the height, platform capacity and set-up location, and we will propose the right telescopic boom lift. Request a quote now