Rent Telescopic Boom Lifts in Deggendorf

Rent telescopic boom lifts for Deggendorf from Luibl Rental, choosing from 26 models with 14.00 to 56.90 m working height and 10.30 to 27.43 m horizontal outreach. In Deggendorf there is almost always an obstacle between the set-up position and the work area: a dyke on the Danube or Isar, a pavement and roadway in front of a facade on the town square, a canopy on an industrial hall or a slope on the Geiersberg. What matters most is therefore usually not the height alone, but how far the platform has to reach beyond this obstacle. We recommend the lift based on exactly this outreach and deliver it from our Passau location.

The horizontal outreach determines how far from the work area the lift can stand. The working height says little about this: a Genie S-65 with 21.80 m working height reaches 17.10 m sideways, a Genie SX-135XC with 43.15 m reaches up to 27.43 m. The table sorts our 26 telescopic boom lifts by the obstacles typical in Deggendorf.

All values are taken from the machines' data sheets. How far the platform still reaches out at a given height is only shown by the model's reach diagram. We check this diagram for your job before recommending a machine.

Along the Danube and Isar, dykes protect the city districts and the surrounding villages. If you work on pumping stations, bridges, bank structures or buildings directly behind the dyke, you usually set up the lift on the land side and reach across the dyke crest. For this you generally need a model with at least 19.70 m outreach.

Dyke, riverbank and harbour: have the set-up position approved before the job

You may not simply drive on or load dykes and riverbank areas. Clarify in advance with the owner or the Deggendorf Water Management Office where the lift may stand and what load the ground can bear. At the Danube harbour, the harbour operator's requirements also apply. For our recommendation we need the horizontal distance from the set-up position to the work area and the height of the dyke crest above the set-up position.

Floodplain: reassess operating weight and ground after every flood

In the floodplain between Deggendorf, Fischerdorf and Natternberg you stand on alluvial soils with high groundwater. Our telescopic boom lifts weigh 5,900 kg (Haulotte H14TX) to 24,856 kg (Genie SX-180). The heavier the machine, the more important paved access routes and load-spreading plates under the wheels become. After flooding or long periods of rain, check the area again, even if it held before.

On the long town square with the Old Town Hall and in the lanes of the old town, the lift usually stands on the roadway or a parking strip. The platform works over the pavement, shop displays and canopies. For eaves, gutters and facades of the townhouses, a model with 15.50 to 17.79 m outreach is often sufficient.

Apply for special use permits and heritage approval in good time

If you set up on public land, you need a special use permit or a traffic order from the City of Deggendorf. On listed buildings such as the Old Town Hall or the Grabkirche, you must also coordinate the work with the heritage protection authority. Allow lead time for both.

Towers and churches: plan outreach and set-up area together

On the tower of the Grabkirche or other tall buildings, the models with 34.00 m working height and more only help if the set-up area is large enough for the chassis and slewing range and can bear the weight. The JLG 1200SJP weighs 18,500 kg, the Genie SX-180 24,856 kg. We clarify with you before delivery whether the paving and square are designed for this.

When working on commercial buildings, the obstacle is usually on the building itself: canopies, ramps, skylights, pipelines or outdoor installations. Which lift fits depends above all on whether you work outdoors or inside the building.

Businesses on the A3 and A92 and at the Danube harbour: diesel up to 56.90 m

At halls, silos and installations around the Deggendorf motorway interchange and at the Danube harbour, the lift usually stands on paved yards and handling areas. There our diesel models work up to 56.90 m working height. On company premises the operator's rules also apply, for example induction, work permits and designated routes.

University and large halls: electric and hybrid without exhaust at the job site

Where no exhaust may be produced, for example in large halls, inner courtyards or on the campus of the Deggendorf Institute of Technology, use the electric models Zoomlion ZT18JE-Li (20.60 m), ZT21JE-Li (22.95 m) and ZT26JE (28.70 m). They operate with zero local emissions. The Genie S-60 FE (20.60 m) with hybrid drive is suitable for jobs that alternate between indoors and outdoors. For the electric machines, plan a charging point with a power connection.

North of the Danube the terrain rises towards the Bavarian Forest, for example on the Geiersberg with its pilgrimage church or towards the Rusel. On sloping plots, the permissible gradient decides whether a lift may operate at all. Therefore set the machine up on a level, load-bearing surface, even if this puts it further away from the building, and compensate for the greater distance with more outreach. The permissible gradient is stated in the operating manual of each model. We will tell you as soon as we know the job site.

With five details we can check a model against its reach diagram and make you a suitable recommendation:

1. Height: the highest point at which work takes place, measured from the set-up position.

2. Distance: the horizontal distance from the possible set-up position to the work area, including any obstacle such as a dyke, pavement or canopy.

3. Platform load: people, tools and material. Our models carry 227 to 454 kg in the platform.

4. Ground and access: asphalt, paving, grass or dyke foreland, as well as the width and height of the access route.

5. Job site: outdoors or inside a building, and whether power is available on site for charging.

We bring the telescopic boom lift from our Passau location to your construction site on a low-loader. From Passau it is around 60 km via the A3 to Deggendorf. We also deliver to Plattling, Hengersberg, Metten, Niederalteich, Osterhofen and the other towns in the district. Tell us the job site address, access route and an area for unloading. For large machines such as the Genie SX-180, we check the route in advance. Transport costs depend on the machine and job site and are listed in your quote.

Telescopic boom lifts may only be operated by persons who have been trained, instructed and appointed by the employer. The standard for training is DGUV Principle 308-008. Instruction is required by Section 12 ArbSchG (German Occupational Safety and Health Act) and Section 12 BetrSichV (German Ordinance on Industrial Safety and Health).

Risk assessment under Section 3 BetrSichV before every job

The employer assesses the hazards before the job. In Deggendorf these include above all set-up positions on dykes and riverbanks, traffic on the town square, overhead power lines, slopes and wind in the open Danube valley. Rescuing a person from the platform also belongs in the assessment.

Operator licence via certified training providers

Briefing on a specific machine does not replace training. You can obtain the operator licence or the IPAF PAL Card from a certified training provider. Through training via certified partners we inform you free of charge and without obligation and put you in touch with a suitable provider.

Are you working behind a dyke, on a facade on the town square or on a hall on the A3? Send us the job site address, working height and the distance over the obstacle. We check the reach diagram and recommend one of our 26 models. Request a quote now