Rent Telescopic Boom Lifts in Erding
You can rent telescopic boom lifts in Erding from our fleet of 26 models with 14.00 to 56.90 m working height: 22 with diesel, 3 with electric and 1 with hybrid drive. Which model fits is often decided in Erding less by the height than by the surroundings. Much of the work takes place next to operations that carry on: at Munich Airport, in pools and halls or in the old town with shops and traffic. In the hall a drive without exhaust fumes on site counts, between old town buildings a narrow and light machine, on the tower or hangar facade the outreach. We deliver the telescopic boom lift from our location in Passau and agree the model with you to suit the location.
Rent telescopic boom lifts in Erding: 26 models for five working environments
The table assigns our rental fleet to the working environments most common in Erding. All values are taken from the models' data sheets.
| Working environment in Erding | Typical work | Models (working height) | Drive |
|---|---|---|---|
| Hangar, hall, pool (indoors) | lighting, ventilation, roof structure from inside | Zoomlion ZT18JE-Li (20.60 m), ZT21JE-Li (22.95 m), ZT26JE (28.70 m), Genie S-60 FE (20.60 m) | electric, hybrid |
| Old town and narrow courtyards | roof, facade, cornice, gutter | Haulotte H14TX (14.00 m), Genie S-45XC (15.56 m), Genie S-45 (15.72 m) | diesel |
| Commerce and logistics around the airport | hall facade, roof edge, signage | Manitou 220 TJ Plus (21.74 m), Genie S-65 (21.80 m), Genie S-65XC (21.81 m), JLG 660SJ (22.31 m) | diesel |
| Residential and commercial new builds | facade installation, windows, parapet | Manitou 260TJ (25.91 m), Haulotte H28TJ Plus (27.50 m), Manitou 280 TJ (27.73 m), Genie S-85 (27.90 m), Genie S-85XC (27.91 m) | diesel |
| Towers, hangar exterior, masts | great height or wide outreach | 8 models from Genie S-105 (34.00 m) to Genie SX-180 (56.90 m) | diesel |
In addition there are the Genie S-65 Trax and S-65XC Trax with 21.80 and 21.81 m working height. A higher model is not automatically the better choice: weight and dimensions grow with the working height, from 5,900 kg for the Haulotte H14TX to 24,856 kg for the Genie SX-180. Depending on the model, the platform capacity is between 227 and 454 kg.
Telescopic boom lifts at Munich Airport: operator and aviation authority have a say
Munich Airport lies in the Erdinger Moos west of the town. Around it hangars, cargo halls, hotels and logistics areas have been built. Rules apply to work there that do not exist at other locations.
In the security area, the airport operator determines access
On the apron and in other non-public areas, every vehicle and every person needs access authorisation. How machine, operator and escort are registered is regulated by the airport operator. Clarify this before ordering so that delivery and collection fit into the operating schedule, and tell us the handover point where the telescopic boom lift will be unloaded.
In the protected construction zone, the lift can be an aviation obstacle
Around runways, structures and equipment may not exceed certain heights without consent. A telescopic boom lift with 40 m working height may therefore require consent in the vicinity of the airport, even if it only stands for a few days. Whether this applies to your set-up position is clarified in advance by the client or operator with the responsible aviation authority.
Electric and hybrid lifts work in hangars and cargo halls
In closed halls you use the Zoomlion ZT18JE-Li, ZT21JE-Li and ZT26JE. They work without exhaust fumes on site and reach 20.60 to 28.70 m working height. The Genie S-60 FE with hybrid drive fits if the lift alternates between hall and outdoor area. Agree door width, floor load capacity and a charging point for the batteries with the hall operator.
Telescopic boom lifts in pools and leisure buildings: tiles, glass and bathing operations shape the job
Erding is also known for its pool and leisure buildings, above all Therme Erding. Anyone replacing lights, cleaning glass roofs or inspecting ventilation ducts in such buildings works above pools, tiles and glass.
Clarify the floor load capacity before the first metre
Tiled floors and pool surrounds are rarely designed for the weight of an aerial work platform. The Genie S-60 FE weighs 8,051 kg, the Zoomlion ZT18JE-Li 8,600 kg, the ZT21JE-Li 10,400 kg. Whether the floor can carry this and what load distribution is needed is assessed by the operator or their structural engineer. Protective coverings for sensitive tiles belong in the planning.
Above glass roofs, outreach decides
Nobody steps onto glass surfaces. The work position must therefore be reachable from the ground, often over a pool or planted area. Indoors the electric models offer 13.30 to 22.10 m horizontal outreach; outdoors the Genie SX-135XC achieves 27.43 m.
The client and operator define barriers and time windows
Guests must not enter the work area beneath the platform. Whether the work takes place outside opening hours or in a cordoned-off area is decided by the operator. Tell us the time window so that we can plan delivery and collection accordingly.
Telescopic boom lifts in the Erding old town: the town and heritage protection approve the set-up position
The old town around Schrannenplatz and Landshuter Strasse is characterised by gable-fronted town houses. Its landmarks are the Schoener Turm tower and the free-standing town tower next to the parish church of St. Johann.
On public ground the lift needs a permit
If the telescopic boom lift stands on a pavement, street or square, a special use permit from the town of Erding is required. If the job interferes with traffic, a traffic order is added. Apply for both early, stating the set-up area, width and weight of the machine.
On listed buildings, the owner coordinates the work with the heritage authority
Many buildings in the old town are listed. Which work is permitted is clarified by the owner with the lower heritage protection authority. For the use of the lift this means: platform and boom keep their distance from stucco, cornices and figures, and you protect sensitive paving with load-distributing plates.
The small models suit narrow lanes
The Haulotte H14TX weighs 5,900 kg and reaches 14.00 m; the Genie S-45 and S-45XC achieve 15.72 and 15.56 m. That is usually sufficient for the eaves, gutters and facades of the town houses. On the towers, larger models are needed, whose set-up area you should measure on the square in advance.
Telescopic boom lifts in the Erdinger Moos and on the Sempt: check the ground before setting up
Around Erding lie the fen soils of the Erdinger Moos, and the Sempt river flows right through the town. On new building areas on the outskirts and in the floodplains the ground is often soft and only partly load-bearing after rain.
A telescopic boom lift transfers its entire weight to the ground via the wheels: 5,900 kg for the Haulotte H14TX, 17,236 kg for the Genie S-85, 24,856 kg for the Genie SX-180. So clarify in advance whether the site road or gravel area can carry this, and plan load distribution plates if necessary. After heavy rain, reassess the set-up position.
If a heavy machine cannot get close enough to the building, outreach helps instead of proximity: the JLG 1350SJP reaches 25.03 m, the Genie SX-135XC 27.43 m sideways. The lift can thus remain on the paved area while the platform works over the soft area.
Your request for a telescopic boom lift in Erding: five details are enough
With these details we suggest a model and plan the transport:
| Detail | What we need it for |
|---|---|
| Working height and horizontal distance to the work position | selecting the model using the reach diagram |
| Location: hall, airport area, old town or construction site | drive and machine size |
| Ground and access | weight, width and floor load must suit the set-up position |
| Platform load: persons, tools, material | 227 to 454 kg depending on the model |
| Rental period and required approvals | coordinating delivery with operator, town or airport |
Transport of the telescopic boom lift from Passau to Erding
From our location in Passau it is around 170 km to Erding, via the A3 and the A92 towards Munich Airport. The telescopic boom lift arrives on a low-loader. At the site the vehicle needs an area for unloading and an access route without passages that are too low. Tell us about gates, bridges or bottlenecks in the old town with your request.
We also deliver to the district, for example Dorfen, Taufkirchen (Vils), Wartenberg, Oberding and Moosinning, as well as to the neighbouring cities of Freising, Landshut and Munich. For projects west of Munich there is separate information under telescopic boom lift rental in Dachau. We agree the delivery date with you; for large machines above 40 m we recommend an early request.
Anyone operating a telescopic boom lift in Erding needs training and authorisation under DGUV Principle 308-008
A telescopic boom lift may only be operated by someone who is at least 18 years old, trained and authorised in writing by the employer. The basis of training is DGUV Principle 308-008.
Before use, the employer gives instruction on the specific machine (section 12 of the Occupational Safety and Health Act (ArbSchG), section 12 of the Industrial Safety Regulation (BetrSichV)). In the risk assessment under section 3 BetrSichV, the employer evaluates the conditions at the site: at the airport, for example, wind on open ground and vehicle traffic; in the old town, pedestrians and delivery traffic; in the pool, wet surfaces and glass. In the platform all persons secure themselves with personal fall protection equipment attached to the designated anchor point.
If your employees do not yet have an operator licence, we put you in touch with a certified training provider free of charge and without obligation. More under training via certified partners.
Request a telescopic boom lift for Erding
Are you planning work in a hangar, on an old town building or on a construction site in the Erdinger Moos? Send us the working height, location and period via the contact form. We will suggest a suitable model from 26 telescopic boom lifts. You will find all models with data sheets in the telescopic boom lifts category, more machines for the town on the page construction machinery rental in Erding.