Rent access platforms and construction machinery in Jihlava

Anyone renting access platforms and construction machinery in Jihlava is planning for a site with a special geographic role: the city lies almost exactly halfway between Prague and Brno, right on the D1 motorway. On top of that comes the elevation of the Vysocina highlands at around 500 metres, with a noticeably longer frost period than in the Bohemian lowlands. This page matches the rental fleet to these two conditions: motorway corridor and climate.

Distribution centres and supplier plants line the D1 between Jihlava and the two metropolitan areas. Anyone building or servicing there rarely works on a single site: one warehouse near Jihlava, a second towards Brno, a third in the Prague area - with the same building services and often an identical maintenance schedule. A machine for several sites is therefore delivered once and moved between locations instead of going back onto the low-loader every time. When you enquire, tell us whether a job stands alone or is part of a chain.

Inside the halls, two tasks dominate. For sprinkler systems, ventilation and lighting over open floor area, electric scissor lifts are the standard solution: 6.30 to 33.00 m working height, platform loads from 227 to 1,000 kg, emission-free and with the largest platform area of all classes. Between stored goods, high-bay scissor lifts with 18.50 to 33.00 m take over - the same heights on a narrower track, so the aisle does not have to be cleared.

The Vysocina lies higher than the surrounding region and freezes earlier and for longer. The outdoor building window is shorter than in Prague or Brno, and whatever is not finished in autumn slips into the following spring - hence the concentration in September and October, when facades, roofs and earthworks are all meant to be completed at once.

When choosing equipment, the ground is what counts: with freeze-thaw cycles, a surface carries differently in the morning than in the afternoon - a set-up that holds while frozen can sink later on. Where load-bearing capacity varies, spider lifts with 13.00 to 39.50 m are the more robust choice: tracked undercarriage, the lowest ground pressure in the range. On load-bearing but unpaved ground, diesel scissor lifts with all-wheel drive are the right answer - 9.70 to 34.00 m with up to 1,134 kg platform load, the highest in the rental fleet. Add winter operation to that: plan for cold starting conditions, allow for sluggish hydraulics, and use outrigger pads on frozen as well as softened ground.

The second large group of customers around Jihlava is component manufacturing for the vehicle industry. Work is carried out while production is running or only briefly interrupted - which means the drive type and ground pressure decide the choice, not the working height. On conveyor systems, extraction units and service lines, 8 to 12 m is usually enough. If the work point sits behind part of a plant, articulated boom lifts with 10.89 to 48.15 m are the answer; in staff and office wings, vertical mast lifts with 10.00 to 12.65 m are the lightest class, able to pass through standard doors.

The platform load is regularly underestimated: two people with a toolbox and a gearbox component quickly exceed 300 kg, which rules out the 227 kg models even though the height would have been right. For silos and hall roofs from the outside, telescopic boom lifts with 14.00 to 56.90 m reach the greatest working height in the range.

Telehandlers handle material distribution wherever there is no crane on site - the normal case for hall extensions along the D1. Rigid models lift 4.30 to 18.80 m at 1.25 to 25 t; rotating telehandlers reach 15.42 to 38.90 m and work all round from a single set-up.

Excavators are available from 1.8 to 30 t operating weight - from the mini excavator for service trenches to the 30 t class for development work in industrial estates. For handling and storage, counterbalance forklifts from 3 to 16 t and high-lift stackers with 2.70 to 5.50 m lift height complete the range.

Every machine leaves our yard with a valid inspection record, CE documentation and operating manual; we keep inspection intervals and maintenance histories for the entire rental fleet.

The law of the country of use applies to the job itself. In the Czech Republic the governing rule is government regulation NV 378/2001 Sb., which covers the safe operation and use of machinery and technical equipment and includes a separate annex for equipment used to lift loads and people. Mobile elevating work platforms are inspected in accordance with CSN EN 280; the wider framework is set by the Labour Code (Zakonik prace, 262/2006 Sb.) and Act 309/2006 Sb.

We provide the inspection record and documentation; the risk assessment and operator instruction remain with the hirer, and the visual and function check before work starts is an operator duty. In supplier plants, site rules are added on top - site access permits, safety briefings and sometimes a requirement regarding the drive type. Clarify these conditions before the low-loader sets off.

It is around 250 km from our Passau site to Jihlava. We organise transport with our own low-loaders and partner hauliers and coordinate the delivery date with your construction schedule. If you need equipment for a whole fit-out season, we invoice at long-term rental rates; platforms and telehandlers are quoted as a package. Jobs further along the D1 are planned into the same run.

Rent access platforms → | Send an enquiry →

Before you enquire, it is worth looking at the designs: at Rent a lifting platform you will find all platform types from the scissor lift to the truck-mounted platform with their strengths, typical applications and operator duties.