Rent aerial work platforms and construction machinery in Kladno

In Kladno, aerial work platforms and construction machinery are mostly needed inside halls that look unremarkable from the outside and are 12 to well over 20 m high inside. The western edge of the Prague metropolitan area is one of the densest distribution and logistics locations in the Czech Republic; alongside it stands metalworking with structural steelwork, supplier production and maintenance. Both shift the decisive parameter away from site access towards the usable height under the roof.

On inner-city sites, the space for the machine is the bottleneck. In the commercial estates around Kladno it is not: yards are generous, docking areas paved, access roads designed for articulated trucks. What does set the limit is the clear height between racking or block storage and the underside of the roof trusses - and how much of it can be cleared during ongoing operations.

So quote three figures with your enquiry: working height at the point of work, clear height under the roof structure and the width of the cleared area. For hall work on open floor space, electric scissor lifts with 6.30 to 33.00 m and 227 to 1,000 kg platform capacity are the standard solution: emission-free, floor-friendly, with a large platform area.

In high-bay operations the work happens between the racking rows, not in front of them. Sprinkler pipework and heads, continuous light strips, smoke detectors, data points, plus racking installation and repair after impact damage - all of it in aisles whose width was determined by the stacker crane and not by the platform.

For this there are high-rack scissor lifts with 18.50 to 33.00 m and 450 to 1,000 kg platform capacity: narrow track, high lifting height and enough payload for a fitter to take pipe sections, luminaires or racking components up in one lift instead of three. Where the point of work lies above occupied racking bays or conveyor technology, an articulating boom lift with 10.89 to 48.15 m brings the basket in from the side; the electric versions remain suitable for indoor use. In office and building services areas, vertical mast lifts with 10.00 to 12.65 m are the lightest solution.

The location in Prague's commuter belt has one practical consequence: almost all projects lie in commercial and industrial estates with their own access, their own gate and their own yard. Delivery by low-loader is straightforward, and permits for the use of public ground are usually not required.

That allows a different structuring of rental periods: where every additional standing week in the city centre costs money and coordination, several work packages at one site can be bundled here and worked through one after another with a single machine. For roof, parapet and hall facade from the outside, telescopic boom lifts with 14.00 to 56.90 m are the class with the greatest reserve; on unpaved ground between the halls, spider lifts with 13.00 to 39.50 m are used.

The second strand in Kladno is metal and steel processing. Here the governing parameter shifts from height to load capacity: two fitters with welding set, cutting torch, tools and spare parts realistically add up to 400 to 600 kg. Anyone who has then ordered a platform with a 227 kg rated capacity works in stages instead of in one go.

The highest capacity is offered by diesel scissor lifts with 9.70 to 34.00 m and 363 to 1,134 kg - outdoors and in ventilated plant areas. In enclosed production areas, electric scissor lifts with up to 1,000 kg remain the permitted alternative with almost the same payload. On top of this come site-specific requirements: hot work permit, deactivation of fire alarm systems, blocking of crane runways while the platform is in use.

Telehandlers distribute material where there is no crane: fixed-frame models with 4.30 to 18.80 m lifting height and 1.25 to 25 t capacity, rotating telehandlers with 15.42 to 38.90 m and a slewing upper structure. Excavators from 1.8 to 30 t handle site development, yard surfacing, utility works and interior demolition during hall conversions. For material handling, forklifts from 3 to 16 t are available, including rough-terrain forklifts for unpaved storage areas.

The law of the country of use applies to the operation and use of the machine. In the Czech Republic this is government regulation NV 378/2001 Sb., which contains a separate annex for equipment used to lift loads and persons. Mobile elevating work platforms are inspected in accordance with CSN EN 280; the statutory framework is formed by the Labour Code (Zakonik prace, 262/2006 Sb.) and Act 309/2006 Sb. Our part: a machine with valid proof of inspection, CE documentation and operating instructions. Your part: risk assessment, operator instruction and the pre-use check before work begins.

In logistics properties the operator's or tenant's site rules almost always apply on top - access arrangements, working time windows outside picking operations, requirements regarding drive type and tyres. Clarify these points before the equipment is scheduled.

Kladno is around 250 km from our Passau site, mostly motorway. Prague lies a good 25 km to the east; projects in the western surroundings can therefore be bundled into one run.

Because the yards are generously dimensioned, delivery is rarely the problem - the time window, however, often is: in distribution centres the quiet period is frequently not in the morning. State your preferred delivery window when ordering. From a rental period of several months, long-term rental conditions apply.

Rent access platforms | Send an enquiry

Which design suits your job? The overview Rent a lifting platform – all platform types at a glance explains scissor lifts, articulating and telescopic boom lifts, mast, spider and truck-mounted lifts and shows what the rental price depends on.