Rent aerial work platforms and construction machinery in Levice

Planning aerial work platforms and construction machinery for Levice means allowing for longer lead times than elsewhere. The town in the south of the Nitra Region is an energy industry location — the surrounding area holds generating plants, along with substation and transmission equipment, pipeline construction and the companies that maintain these facilities. Before a machine is allowed onto such a site, there is access control, zoning, documentary evidence and work permits.

On energy facilities it is not the requirement that determines the choice of equipment, but the permit process. Access authorisation for personnel and equipment, the division of the site into zones, the required certificates and the written work permit rest with the operator of the facility — not with the contractor carrying out the work, and certainly not with the rental company. We can supply a machine with complete documentation; whether it may enter a particular zone is decided by the operator alone.

This results in a sequence that cannot be reversed. First you clarify with the operator which zone the work takes place in and which conditions apply there — frequently they concern the drive type, exhaust emissions, spark formation, safety clearances and the question of whether a shutdown is required. Only then can the equipment class be determined. The second consequence is the lead time: access applications, instruction sessions and permits often take several weeks.

In energy and plant construction around Levice, three types of application recur: substations and switchgear installations with high working points and fixed safety clearances; power line and pylon work in open terrain on unpaved ground; pipeline construction and maintenance on pipe bridges, valves and insulation.

For the first and third type, articulating boom lifts with 10.89 to 48.15 m are the standard class, because they reach out over parts of the installation and establish the required lateral clearance. Where the task is primarily about height, telescopic boom lifts cover 14.00 to 56.90 m. In open terrain, where surface area and load capacity matter, diesel scissor lifts with all wheel drive and 9.70 to 34.00 m at up to 1,134 kg are intended; where no load bearing set up area can be established, tracked boom lifts with 13.00 to 39.50 m are the answer.

The same applies to all three types: the safety clearance to live parts determines the set up position, and this in turn determines the outreach required. The clearances and any shutdown are specified by the facility operator. Please therefore tell us the working height and the horizontal distance to the nearest permissible set up area.

The second strand in Levice lies within the town itself: mechanical and metal engineering companies, warehouse and production halls, plus agricultural businesses with silo and storage equipment in the surrounding area. Here it is not the permit process that decides, but the geometry of the hall, and lead times are shorter.

In production and warehouse halls, electric scissor lifts with 6.30 to 33.00 m and 227 to 1,000 kg are the working class for lighting, service lines and crane runway maintenance. In narrow warehouse aisles, high-rack scissor lifts with 18.50 to 33.00 m are the choice, and in plant rooms the mast lift with 10.00 to 12.65 m.

In plant construction as well as in hall construction, the telehandler takes over material lifting without a crane. Fixed models lift 4.30 to 18.80 m at 1.25 to 25 t, while rotating versions reach 15.42 to 38.90 m all around from a single set up position — on a site with only one approved set up area, often the only practicable solution.

Excavators from 1.8 to 30 t operating weight cover cable and pipeline trenches, foundations and earthworks. In addition, counterbalance forklifts from 3 to 16 t are available and, for unpaved surfaces, rough terrain forklifts.

On an energy facility, equipment documentation is not an administrative matter in the background, but the condition for the machine to get in at all — and Slovak law sets a stricter framework here than German contractors are used to.

Vyhlaska MPSVR SR 508/2009 Z. z. classifies a motor driven pojazdna pracovna plosina with a lifting height of more than 1.5 m as a zdvihacie technicke zariadenie skupiny A — a vyhradene technicke zariadenie subject to official inspections (uradne skusky, opakovane uradne skusky) and qualification requirements for the operator. In addition there are NV SR 392/2006 Z. z., Zakon 124/2006 Z. z. and the test standard STN EN 280.

Responsibilities are clearly separated. We supply every machine with a valid test certificate, CE documentation and operating instructions — the part you submit with the access application. Everything concerning the facility remains with the operator and the contractor carrying out the work: access authorisation, zoning, safety clearances, shutdown, work permit, risk assessment, instruction and the inspection before work begins. Some operators require the certificates in the Slovak language — clarify this early.

Levice is around 450 km from Passau, predominantly motorway via Vienna and Bratislava. Nitra lies to the west in the same kraj; assignments in both towns can be scheduled on one run. The delivery date depends on the approved time window, not on the progress of the works. For maintenance projects lasting several weeks we invoice at long term rental rates, and several machines for the same window are scheduled together.

Rent aerial work platforms → | Send an enquiry →

Which design suits your job? The overview Rent a lifting platform – all platform types at a glance explains scissor lifts, articulating and telescopic boom lifts, mast, spider and truck-mounted lifts and shows what the rental price depends on.