Forklift Rental in Regensburg: 53 Models up to 33,000 kg

Rent forklifts for Regensburg from 53 models with 1,200 to 33,000 kg capacity and lift heights up to 6.07 m. In the city, warehouses and plants of the automotive, mechanical engineering and electrical industries meet the port on the Danube and construction sites in all city districts. When choosing a machine, many only look at the weight of the load. Its dimensions are just as important, however: a pallet, a six-metre-long profile and a bulky component of the same weight require completely different forklifts. That is why we organise the rental fleet by load shape. We deliver the machines by low-loader from Passau. An overview of all machines for the city can be found under Construction machinery rental in Regensburg, the complete fleet in the Forklifts category.

Length, width and stacking height of the load determine which type works safely. The table links the five most common load shapes with the rental fleet.

If a load fits into two rows, the more demanding property decides.

The pallet is the simplest load shape because dimensions and centre of gravity are standardised. What counts here above all is manoeuvrability, drive type and operating time.

Electric and pallet stackers in the hall

The 22 electric forklifts lift 1,500 to 10,000 kg to 3.45 to 6.00 m. In shift operation, plan charging times and a charging point. For narrow aisles and short distances, the six pallet stackers with 1,200 to 2,000 kg are suitable. They lift 2.70 to 5.50 m and are therefore sufficient for many shelf levels in warehouse and workshop. During stocktaking, seasonal peaks or a warehouse relocation, they supplement your own fleet for a few weeks.

LPG between hall and yard

The three LPG forklifts with 1,800 to 7,000 kg shuttle well between ramp and open area. Use them in enclosed halls only if the risk assessment permits it.

When loading and unloading trucks at the ramp, the dock leveller, gradient and load capacity of the loading floor are what matter. Match the fork length to the load carrier so that the pallet rests fully on the forks. Double-stacked pallets raise the centre of gravity; in that case, calculate with the total height of the load unit.

Long loads protrude far beyond the forks at the sides and require space when turning. The Port of Regensburg with the West Port and East Port is a typical place for this; cargo handling there is mainly operated by bayernhafen. Clarify access and routes with the port operator before use.

For profiles, pipes and timber outdoors, the eleven diesel forklifts with 3,000 to 10,000 kg are suitable. Pick up long goods as centrally as possible so that the load does not tip, and check passages, gates and racking aisles for the full length. In wind, a long load acts like a sail, so drive slowly and keep the load low.

Securing bundles

Loose profiles or boards slide off the forks when braking. Bundle long goods before picking them up and place squared timbers underneath so that the fork tines enter cleanly. If the forklift travels between quay, storage area and truck, footpaths should be separated, because the ends of the load swing out wide at every bend.

Bulky loads block the forward view and often stand on uneven ground. On construction sites in the city districts and the surrounding area, rough-terrain forklifts are therefore often used.

Tyres and ground

The choice includes the Manitou M30-4, M50-4, Ausa C300H and C500H x4 with 3,000 to 5,000 kg and 4.75 to 5.45 m lift height. Their tyres provide grip on gravel and compacted ground. Near the river, the ground stays soft for a long time after flooding, as in June 2013, when the Danube reached around 6.80 m at the Iron Bridge.

Visibility and guidance

If the load blocks the view, the driver reverses or works with a banksman. Plan routes free of trenches and cables. Pick up wide precast elements or formwork panels so that the centre of gravity lies between the fork tines and nothing overhangs on one side. If a part is wider than the driving lane, define the route in advance and clear it.

The higher the forklift lifts, the less it carries. What counts is the load chart on the machine, not the rated load on the type plate alone. If the centre of gravity of your load lies further forward than intended, the permissible load decreases further.

The greatest lift height in the rental fleet is reached by the Hyundai 80D-9 with 6.07 m. In addition to the stacking height, also check the overall height of the mast so that the forklift fits under gates and ceilings. Sprinkler pipes, lights and ventilation ducts often hang lower than the actual hall ceiling and further limit the usable height. If the goods have to go higher than 6.07 m or over an edge, a telehandler is the right machine.

Racking and floor

In racking storage, shelf load and bay load must match the goods; these values are shown on the racking. A level floor is a prerequisite, because even small inclines deflect the mast considerably at great height. Set loads down slowly at the top and only tilt the mast once the goods are resting on the racking.

Mechanical and electrical engineering are among the city's defining industries, and companies there move installations, tools and moulds with high individual weights. The seven heavy-duty forklifts lift 8,000 to 33,000 kg to 4.50 to 6.07 m. The most powerful model is the Kalmar DCG 330-12T with 33,000 kg. Do not choose the machine close to its limit, but with a reserve for lifting accessories, timber packing and inaccurate weight specifications. If a machine is only relocated once, a short rental is often enough; when relocating entire production lines, several weeks are more likely.

Check route and floor

With machines, the centre of gravity is rarely in the middle. Ask the manufacturer for weight and centre of gravity and compare both with the chart. Hall floor, manhole covers and ramps must carry forklift and load together. On plant premises, the operator also specifies routes, registration and time windows, which you clarify before delivery. For loads in tight courtyards, the mini crane in Regensburg is also an option.

From Passau it is around 120 km via the A3 to Regensburg. Small electric forklifts and pallet stackers travel light; heavy-duty forklifts need a low-loader with a suitable payload. Ensure access for the articulated lorry and a firm unloading area at the destination.

We also supply businesses in Neutraubling, Regenstauf, Schwandorf, Kelheim and Straubing as well as in Lappersdorf. Enquire early, then the delivery date can best be aligned with your schedule. Read more about logistics under Transport.

In your enquiry, state whether your own forklift or crane is available at the destination for unloading. If neither is available, the machine drives down the low-loader's ramp and needs sufficient space behind the vehicle.

Driving authorisation in the company

Under § 7 of DGUV Vorschrift 68, only persons who are at least 18 years old, fit and trained and have been authorised in writing may drive. Training is described in DGUV Grundsatz 308-001.

Assessment and instruction

Under § 3 BetrSichV, the employer assesses the hazards at the job site, such as traffic routes, ramps and drive type. Instruction is based on § 12 BetrSichV and § 12 ArbSchG. Our briefing on handover explains the specific machine, but it does not count as driver training. If your employees lack the certificate, we will put you in touch with a certified training provider without obligation and free of charge, see Training through certified partners.

For heavy-duty and rough-terrain forklifts, an additional briefing on the machine is worthwhile, because dimensions, visibility and handling differ significantly from an indoor forklift. Document instruction and authorisation in writing so that the records are at hand during an inspection on the construction site or in the plant.

Tell us the weight, dimensions and stacking height of your load, along with the job site and period. From this, we put together type, model and transport. Enquire now